To turn on the SwingTIP motion sensor, press and hold the power-button on the top of the sensor for 3 seconds. If the SwingTIP sensor is charged, the LED will illuminate and flash an alternating green and amber when powered on. If the SwingTIP sensor is paired and connected to a mobile device, the sensor will slowly flash green. When the battery charge on the sensor starts to get low, the slow green flash will be replaced with a a slow amber flash.
To power the sensor down, press the button twice in quick succession. After 15 minutes of non-use, the sensor will automatically power itself down.
Note: Even when the sensor is powered down, it will continue to draw down battery power. As such, we recommend that you charge your sensor fully for 2 hours before every use.